U-Phone-iT (Discontinued product)

(Discontinued product) U-Phone-iT 4G is a programmable remote switch for 115 Volt AC equipment.

SKU: P6040 Categories: ,


Discontinued product as of 03-MAR-2021.  Support and warrantees are unaffected for current users.  An upgrade program will be available at a later date.

We recommend our P6060, SwitcheOn as a great lower cost alternative.

U-Phone-iT  is a programmable remote switch for 115 Volt AC equipment that is activated by telephone call or by text messages generated by free iPhone App or any text capable cell phone.
 U-Phone-iT will execute a stored “Resident” Run cycle on receipt of a phone call.
 Two 115 VAC outlets are independently controlled, allowing the unit to service separate devices. Outlets are easily activated by ON/OFF or user- selected ON times commands.
 An approved user list and password protects U-Phone-iT from unauthorized activation.
 The device can be interrogated for current status and stored programming. It responds promptly by Text message.
 The device monitors cell signal strength at its location, providing placement guidance for best reception.
 An optional remote antenna aids reception in cell resistant structures.
 Unit sends automatic notices of power failures and power restorations.
 U-Phone-iT  is delivered with active, prepaid cell service on the AT&T 4G GSM system. User-managed cell service can costs as little as $4.00 per month. Optional Cell Management Service (CMS) provides 360 days of service at a low fee.

What comes with U-Phone-iT?

 Prepaid Cell Service activation and preregistered AirVoice Wireless account.
 Access to user guides/manuals
 Free remote programming help
 Free iPhone App for U-Phone-iT  (Note: You can also use our regal unit Android or iOS app but you will not be able to access/use the Clock operations.)

Additional information

Weight 4 lbs
Dimensions 9 × 5 × 5 in
Maximum Switching Amps

8.7 Amps

Current Protection

10 Amps

Phone system


Operational Temperature Range

-10 to 120º F (-23 to 49º C)

Voltage required

110-125 VAC

Maximum Wattage

1000 Watts @ 115 volts

AC Frequency

50 or 60 Hz

General Construction

ABS enclosure

Power Entry

Hard Wired with Nema 5-15 plug (2 vertical blades and a ground)


12 months parts and workmanship

External type jack for antenna






There are no reviews yet.

Be the first to review “U-Phone-iT (Discontinued product)”

You may also like…